Tubular Level Indicator 300mm C-C Distance | Tubular Level Indicator Gauge

Tubular Level Indicator 300mm C-C Distance | Tubular Level Indicator Gauge

“ARIS ” MAKE Tubular level indicators detect the level of liquid in the process vessel via direct communication means. These devices mainly find their application in low pressure, non-toxic and non-sticky liquid level measurement applications. Tubular level Indicators are used for reading liquid level in atmospheric or pressurized tank. 

They are simple in construction and reliable in operation for direct visual verification of level in vented or lightly
pressurized tanks. The measuring tube is protected by tie rod. Th

e level gauge are supplied with auto shut off ball
check valve to prevent leakage of process fluid in event of breakage of glass tube.

INTRODUCTION

ARIS Tubular Level Indicator (Side Mounted) is a reliable device for reading the level of the liquid in the tank can
easily be observed. It is a simplest form of level indicator. These level indicators find wide application for level
measurement in process tanks, batching tanks etc.

PRINCIPLE

The Gauge is fitted between two end blocks through gland packings, The gauge is mounted parallel to tank so as to
form a close loop causing tank liquid to seek its level in gauge. Guards are provided in the form of tie-rods / c -
channels around the gauge to protect it from accidental blows. End blocks have built-in-isolating valve, drain valve and
vent plug.

Specification

Connection	Flanged ASA 150#/ASA 300#
End Fitting	CS/S.S.304/S.S 316/P.P
Protective Channel	C.S. Rectangle Channel box With Powder Coated/ S.S.304/S.S 316
Glass Tube	Heavy Walled Borosilicate H-19/16 / 22 / 25
Packing	Teflon
Valve	C.S./S.S.304/S.S. 316/P.P
Press Rating	Up to 12 Kg/cm2
Temp. Rating	Up to 100 DEG C to 200 DEG C
Range	300 to 5000 mm
Vacuum	Full

General Data

Glass Tube	Heavy Walled Boro sillicate Glass H-19 / 16 Teflon
End Block MOC	CS/ SS 304 / SS 316 / PP / PVDF
Protective Channel	C.S. Rectangle Channel box With Powder Coated/ S.S.304/S.S 316
Packing	Teflon
Connection	Flanged ASA
Valve	CS / SS 304 / SS 316 / PP / PVDF

Design Data

Mounting	Side
Operating Pressure	Up to 15kG / cm2
Operating Temperature	Upto 100 ° C Up to 4 Maters
Process Connection	Flanged or Screwed
C-C Distance (+3 mm)	Up to 4000mm (more than 4000mm Please conslt Factory)