Positioner CMSX-P-S-C-U-F1-S-50-A 3929370 Festo
₹ 26,400.00
₹ 31,152.00+18% GST
Freight Extra (Godown Delivery)
Quantity
Min 1 • Stock 200
Product Specification
| Product Name | Positioner CMSX-P-S-C-U-F1-S-50-A 3929370 Festo |
| Brand | Festo |
| Product Code | HYP-0113 |
| Country of Manufacturer | IN |
| Weight | 1.000 |
| Category | Positioners |
| Test Certificate | No |
Product Description
Positioner CMSX-P-S-C-U-F1-S-50-A 3929370 Festo - Strategic Industrial Guidance
Festo Positioner CMSX
Positioner CMSX-P-S-C-U-F1-S-50-A 3929370 Festo
| Feature | Value | |
| Design | Digital, electropneumatic positioner | |
| Mode of operation | Single-acting | |
| Design characteristics | Safety position – pneumatic outlet 4 exhausted | |
| Mounting position | optional | |
| Type of mounting | With accessories | |
| Functional principle of measuring system | Potentiometer | |
| Sensing range | 0 deg ... 100 deg | |
| Display | 7-segment LCD display With backlighting |
|
| Setting options | Via display and keys | |
| Size of dead zone | 0.5 % ... 10 % | |
| Operating pressure | 0.3 MPa 0.8 MPa | |
| Operating pressure | 3 bar ... 8 bar | |
| Operating pressure | 43.5 psi ... 116 psi | |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | |
| Note on operating and pilot medium | Maximum particle size 40 µm | |
| Standard nominal flow rate (standardised to DIN 1343) | 50 l/min | |
| Pneumatic connection | G1/8 | |
| Nominal operating voltage DC | 24 V | |
| Operational voltage range DC | 21.6 V V | |
| Max. current consumption | 600 mA | |
| Reverse polarity protection | For operating voltage connections | |
| digital input, signal range | 0 - 10 V 0 - 20 mA 4 - 20 mA |
|
| Analogue inputs, max. dynamic range | 0 - 24 mA 0 - 11 V |
|
| Analogue inputs, linearity error at 25 °C | 0.5% | |
| Analogue inputs, temperature coefficient | <0.02 %FS/K | |
| Analogue inputs, resolution | 16 bit | |
| Analog inputs, overload protection | yes | |
| Analogue inputs, electrical isolation | no | |
| digital output, signal range | 4 - 20 mA | |
| Analogue outputs, max. load impedance | ≤600 Ohm | |
| Analogue outputs, linearity error at 25°C | 0.5% | |
| Analogue outputs, temperature coefficient | <0.02 %FS/K | |
| Feature | Value | |
| Analogue outputs, resolution | 12 bit | |
| Analogue outputs, reverse polarity protection | yes | |
| Analog outputs, short circuit current rating | yes | |
| Analog outputs, overload protection | yes | |
| Analogue outputs, galvanic isolation | no | |
| Characteristic for inputs | To IEC 61131-2, type 3 | |
| Switching input | PNP NPN | |
| Digital inputs, reverse polarity protection | yes | |
| Digital inputs, electrical isolation | Yes, via optocoupler | |
| Digital outputs, reverse polarity protection | yes | |
| Switching output | 3 x PNP or 3 x NPN, switchable | |
| Digital outputs, output current | 100 mA | |
| Digital outputs, short circuit current rating | yes | |
| Digital outputs, overload protection | yes | |
| Digital outputs, electrical isolation | Yes, via optocoupler | |
| Electrical connection 1, function | 3x digital output Analogue output Analogue input Digital input Power supply Load power supply |
|
| Electrical connection 1, connection type | Terminal strip | |
| Electrical connection 1, connector system | Screw terminal | |
| Electrical connection 1, number of connections/cores | 13 | |
| Electrical connection 1, tightening torque | 0.6 Nm | |
| Electrical connection 1, conductor cross section | <1.5 mm² | |
| Cable fitting | M20 x 1.5 for electrical connection 1 | |
| Permissible cable diameter | 7 - 13 mm for electrical connection 1 | |
| Max. cable length | 30 m for electrical connection 1 | |
| Ambient temperature | -5 °C ... 60 °C | |
| Storage temperature | -20 °C ... 60 °C | |
| Relative air humidity | 5 - 95% Non-condensing |
|
| Degree of protection | IP65 | |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 As per EN 60068-2-29 | |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 As per EN 60068-2-6 |
|
| Pollution degree | 3 | |
| Approval | RCM trademark | |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
|
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | |
| Material housing | PC-reinforced | |
| Material screen | PC | |
| Material base plate | Wrought aluminium alloy, anodised | |
| Material shaft | High-alloy stainless steel | |
| Material coupling | High-alloy stainless steel | |
| Material screws | High-alloy stainless steel | |
| Material seals | NBR | |
| Material cable gland | PA | |
| Material blanking plug | PA | |
| Feature | Value | |
| LABS (PWIS) conformity | VDMA24364-B2-L | |
| Note on materials | RoHS-compliant | |
| Product weight | 970 g | |
| Dimensions (W x L x H) | 190 mm x 105 mm x 130 mm | |
Returns & Cancellation
Returns Policy:
1. Once orders are placed, cancellations are not permitted.
2. Payments for orders will not be adjusted or refunded in case of cancellation.
Shipping & Delivery Policy:
1. 100 INR will be charged as shipping fee if buyer and seller are from same city. If buyer and seller are from different cities, the shipping charges will be on "To Pay Basis" or at actuals.
2. Shipping freight costs will be additional and based on actuals, to be borne by the buyer.
3. Additional shipping services such as courier or door delivery will incur extra charges, to be borne by buyer on extra at actuals basis.
4. Material will be shipped exclusively on a To-Pay basis for Godown Delivery only.
Feedback
You're reviewing: Positioner CMSX-P-S-C-U-F1-S-50-A 3929370 Festo
Your Rating *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.