EA M8 N 531583 Fischer 

EA M8 N Drop-In Anchor 531583 Fischer

 EA M8 N Drop-In Anchor Zinc Plated Steel 531583 (Pack of 100) Fischer

Advantages

• Hammerset Anchor With Internal Thraed For Prepositioned Installtion.;
• When The Expander Plug Is Driven In With EAW H Setting Tool The Ancor Sleeve Is Expended And Is Tensiond Againest The Hole Wall 
• Suitable For All Screws Or Studs With metric Threads. 
• Low Anchoring Depth Reduces Drilling Time And Thus Allows Cost -efficient Installtion.
• Surface- Flush Anchor Allows The Attached Item To Be Removed And Refitted Several Times
• Internal Thread Diameter 6 To 20mm 
• Zinc Palted Steel Version For Indoor Use 
• EA ND Hammerset Anchor Is Suitable For Diamond Drilling Machines And Diamond Saws. 

Installtion 

• The EA N Is Suitable For Pre Positioned Installtion 
• Position The Hammerset Anchor In THe Drill Hole And Drive In Flush To The Surface Of The Anchor Base Using The Hammer. 
• The Sleeve Is Then Expaned By Driving In The Internal Blot With The EHS Plus Setting Tool ( Alternative EMS Machine Setting Tools) And Expaded Against Driil Hole Wall 
• The Setting Tools Must Sit On The Rim Of The Anchor To Ensure Correct Expansion 

 

Building Materials 

• Non Cracked Concrete ≥ C 20/25. 
• Natural Stone With Dense Structure.
• Anchoring Light Ceiling Linings And Suspended Ceilings

Buy EA M8 N Drop-In Anchor Zinc Plated Steel 531583 Fischer

Item	Zinc Plated
EA M8 N	531583
thread d1 m (mm)	8
Nominal drill-Ø do (mm)	10
Min. drill depth at prior insertion mode ho (mm)	30
Min. anchorage depth hef (mm)	30
Min. bolt penetration e1 (mm)	8
Max. bolt penetration e2 (mm)	13
Total length l (mm)	30
Installation torque Tinst (Nm)	8
Related setting tool (mm)	504576 EA-ST 8
Qty. per box (pcs)	100