Janatics Inline Slide Valve GS153

1/2 Inline Slide Valve Janatics

 

 

 

Features
Inline mounted
Sleeve type, saves space
Smooth, easy operation

 

Application

These valves can be used at the inlet of pneumatic tools like screwdriver, grinder etc., pneumatic systems and near machineries using pneumatic systems, for quick and convenient connecting - disconnecting of compressed air

Technical Specifications

Ordering No	GS15	GS151	GS152	GS15	GS154
Siz	R1/8	R1/4	R3/8	R1/2	R3/4
Medium	Compressed air, filtered
Maximum working pressure	10 bar
Ambient / Medium temperatur	5! - 60! C
Materials of construction	Brass, Aluminium, Nitri
NW mm	5	7	11	13	20
Flow rate lts/min @	500	1000	2800	4500	10000
Weight Kg	0.088	0.090	0.224	0.249	0.375

Operation
Moving the sleeve towards " OUT ", connects the air line to the system and moving the sleeve in the opposite direction, will close the inlet port and exhaust the down stream air.

Precautions

•  Note the direction of flow before installation and connect piping accordingly.
•  Flush pipings for dirt, dust, rust and other foreign particles.
•  Install in clean atmosphere.
•  Use teflon tape on taper threads. Ensure teflon tape does not enter the unit during tightening.