FRP Push Button Station (Start/Stop) 265X165X90MM With Normal Actuator HH12

FRP Push Button Station (Start/Stop) 265X165X90MM With Normal Actuator HH12

 

FRP (Fiber Glass Re-Inforced) Start / Stop P.B. Station Without Any Canopy With 1No. Shrouded Green Spring Return Actuator With No Contact For Start, & 1No. M. Red Stayput Actuator With NC Contact For Stop, 1No.72x72MM M.I.S.C.90°Scale Ammeter And 1No. 6A Cam Type 1 Pole 2 Way Local / Remote Or Auto / Manual, Selector Switch, Wired Up To 9:2.5SQMM. Connectwell Clip On Terminals, By Grey Pvc Insulated 1.5SQMM Copper Wire With Tinned Copper Cable Lugs And Ferrules On Both Sides. Terminals Will Have Terminal Marker On One Side External Legs Are Provided For Wall / Structure Mounting. 2:3 / 4"Cable Entries Will Be Provided At The Bottom. All Elements & Actuators Will Be Of Siemens Make. (Push Button May Be Replaced By Lamp, Selector Actuator Or Potentiometer, IP65 Class Of Protection As Per IS / IEC 60529-2001. Pigmented Light Grey Hade 631 As Per IS5, Thickness Of Enclosure 3-4MM, 6MM Round Neoprene Rubber Gasket In Cover Groove, 2Nos Brass Earthing By Round Head Nickle Plated Brass Screws With Plain Washer And Spring Washers, Cover Fixing By SS Screws 5MM Captive. In This lCS Upto 2NO+2NC Contact Elements Can Be Provided On Each PB And Upto 20 Terminals Can Be Provided. Upto Max 4 Entries Can Be Provided At Bottom. Selector Switch Could Be Upto 2Pole 2Way With Or Without Off. Type: HH12