Fischer ZP bolt anchor 

Fischer ZP bolt anchor FBN II

FBN II 20/30 (20x187) ZP bolt anchor (pack of 10) 45573 Fischer

 

APPLICATIONS

▪ Steel constructions

▪ Guard rails

▪ Consoles

▪ Ladders

▪ Cable conduits

▪Machines

▪ Staircases

▪ Gates

▪ Façades

 

ADVANTAGES

• The Standard Anchorage Depth Achieves The Maximum Load-Bearing  Capacities. Thus Fewer Fi xing Points  And Smaller Anchor Plates Are Required.
•  The Reduced Anchorage Depth Reduces The Drill Hole Depth. This Minimises The the Drill Hole Depth. This Minimises The Whilst Increasing fl Exibility
• The Long Thread Balances Component Tolerances And Allows For Stand-Off  Installations, Thus increasing Fl Exibility
•  Few Hammer Blows And The Minimal Torque Slippage Allow For A Noticeably Simpler Installation.
• The Drive-In Pin Protects The Thread From Damage, And Thus Ensures A Faster Installation And Dismantling Of The Attachment.

FUNCTIONING

• The FBN II is suitable for pre-posi tioned and push-through installation; also suitable for stand-off installation under certain conditions.
• Prior to installation, place the hexagon nut in the optimal position (the drive-in  pin projects by approx. 3 mm out of the hexagon nut).
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
• The head embossing off ers a simple control of the anchoring.
• In the case of series installation, we recommend using the FABS bolt  anchor setting tool.