4 Zone Conventional Fire Alarm Control Panel, RE 104 | Ravel

4 Zone Conventional Fire Alarm Control Panel, RE 104 | Ravel

• RE-104 Fire Alarm Control Panel 

Product Overview

RE-104 is a right blend of affordable design and quality with latest technology for fire alarm control panels.This microprocessor based conventional Fire Alarm Control panel, is designed for small size commercial buildings and small scale industries. RE-104 model is an user friendly 4 zone standalone control panel, with optional zone wise Sounder/Contact respectively.

Special Features:

• Switched Mode Power Supply. 

• Modular Construction, Serviceable. 

•  Surface Mount Technology.

• Battery polarity & deep discharge protection.

Features:

• As per IS -15908: 2011 Standard.
• 16 X 2 Dot Matrix LCD Display.
• Standby battery backup with built in charging.
• Fire / Fault status in unambiguous colored LED indication.
• Switch Mode Power Supply.
• Tactile Keypad for easy panal Operation.
• System ON indication.
• Main Standby status indication.
• Low Battery Visual warning with audible tone.
• Relay output for actuators,for Fire and Fault.
• Lamp Test facility.
• Zone wise one man Walk Test Facility.
• Zone wise lsolation facility with loop Voltage cut off.
• Compatible to all type of Conventional Detectors.
• Optional Zone Wise Sounder/Zone Wise Contact.

Electrical Specification:

Primary Power :-	120 / 220VAC + 10% -15%, 60 / 50 Hz. 60W
Standby Power :-	24VDC (2 Nos of 12V, 7Ah Sealed Lead acid battery). Quiescent current : 55mA
Operating Condition:-	Operating Temperature - 0 - 49° C/32-120° F. Storage Temperature - 0 to 60 C Relative Humidity - 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F.
Charging Circuit:-	Charging Voltage - 28.0V, ± 2% Charging Current - 0.5 A (Max.).
Notification Appliance Circuits:-	Class B wiring Operating Nominal Voltage: 24VDC Current for NACs : 0.6 Amp End-Of-Line Resistor : 4K7, 1/4 watt
Common Relays:-	Type : Form C No of Relays : 3 Relay Contact Rating : 2Amps @ 30 VDC, 0.5Amps @125VAC. Power Factor : 1.0
Initiating Device Circuits (Zone Circuit):-	All zones are Class B wiring Normal Operating Voltage : 14- 21 VDC Alarm Current : 15 - 30mA Short Circuit Current : 42mA Maximum Loop resistance : 50 ohms Maximum End-Of-Line Resistor : 4.7K, 1/4watt Standby Current : 6.8mA (2.4mA for Detectors)

Mechanical Specification:

Dimensions	: (350W X 250H X 100D)
Color	: Red / White
Construction	: 18 Gauge (1.22mm) CRCA sheet with powder-coated finish
IP Rating	: IP50
Cable Entry	: 11xø19mm Knockout on top of the cabinet